An 1869-1870 Work Dress

Some time ago, I was asked to help at Rock Creek Station for the Oregon Trail Day that is put on for 4th graders studying Nebraska History.  Rock Creek Station is a place where there was a bridge over a river for travelers on the Oregon trail, was a Pony Express Station for a time, a stage coach station for a while, and of course, where Wild Bill Hickok killed his first man.

I did not have a dress both appropriate to the era of the Oregon Trail and suitable for working outside demonstrating spinning and weaving, so I decided to make one.  (Both of the dresses I have appropriate for the range of years the Oregon Trail was in use are fancy.)  My friend Marna very kindly drafted a pattern for me off an original dress she had, and I proceeded to scale it up to my size (the original wearer was very short– maybe 4’8″), and adjust it to fit.  I also ordered in a dark calico with a bright paisley pattern appropriate to the 1860’s.  I decided to go with a more 1860’s aesthetic over all, rather than 1870’s, so I would be able to wear it at Stuhr Museum in the 1860’s cabin as well.

Basically, I sewed it with Victorian speed sewing techniques– which you’ll have to take my word for, because I didn’t really take pictures as I went.  The neck, sleeves, and cuffs are piped, and the cuffs are sewn in such a way that the facing flips to the outside, finishing the edge and making a decorative band all at once.  The flounce on the skirt is sewn with a bias band on the outside, machine stitched down, finishing the seam and creating reinforcement all at once.  The hem is machine done– pretty much everything but the neckline facing and hooks and eyes are done by machine.  This is how the original was done– as soon as our ancestors had sewing machines, they used them as much as they could!

1860's Dress Collar

The Collar

Oh yeah– I made a bonnet too.  It’s appropriately historically awful, but a real wonderful thing to have on your head in the sun.  Verdict: these may look rather horrible, but they need to come back.  This one is corded in bands, and then starched within an inch of its life.  Starch is an absolute must.

The Ugly 1860's Corded Bonnet

The Ugly Bonnet

I didn’t get many pictures when I was at Rock Creek Station back in September, but I did go out with my husband later and get some really good photos at the park.

All Ready for Work, 1860's Dress

All Ready for Work

But I'm Reading Tennyson Instead

But I’m Reading Tennyson Instead

I wore my sontag too, for pictures, and a plain pleated apron.  The apron has a good deal of grime already worn into the bottom of the hem.

I picked Tennyson’s Poems to carry as a prop because I read a book in high school about a pioneer girl in Nebraska, and she memorized a poem by Tennyson– “The Eagle”.  It seemed appropriate.

Oh, Tennyson. . . 1860's Work Dress

Oh, Tennyson. . .

I'm reading about Lady Claire, I think. 1860's Work Dress

I’m reading about Lady Claire, I think.

A Good Close Shot to Show the Pleats

A Good Close Shot to Show the Pleats

Relaxing in the Leaves

Relaxing in the Leaves

Side View, 1860's Work Dress

Side View

Back View, 1860's Work Dress

Back View

This is where I pause to enumerate my historical undies, because almost none of them are correct for this time, but I made it work.  1860’s Chemise and Drawers, 1890’s Corded Corset, 1840’s Bustle Pad, 1840’s starched petticoats.  I really long for a small hoop, after my day at Rock Creek.

The Park is Alive, With the Sound of Music!

The Park is Alive, With the Sound of Music!

Running Through the Greenwood

Running Through the Greenwood

My dear husband had me running and running all over to get a good shot of me running.  I usually look ridiculous when I run.  I am just not a runner.  But I like this shot.  It shows how much mobility you do have in a corset and long skirt.

It just so happened that this fit into the Heirlooms and Heritage Challenge for The Historical Sew Monthly, so here are the details!

What the item is: Late 1860’s Work Dress

The Challenge: Heirlooms and Heritage

Pattern: Drafted off an original in the collection of Marna Davis, greatly enlarged because the original was for a tiny lady.

Year: 1868-ish.

Fabric: 7 yards of cotton calico.

Notions: Thread, hooks and eyes.

How historically accurate is it? I did everything the way the original was made. This is probably 95%, accounting for fabric made in a modern way.

Hours to complete: 20

First worn: For an Oregon Trail day at Rock Creek Station, doing spinning and weaving demos for fourth graders.

Total cost: $36 for fabric, $5 for hooks and eyes. $41 total.

This is a heritage piece because Rock Creek Station and the Oregon Trail are a big part of my state’s (Nebraska) history. Also, my dad’s ancestors came to Nebraska in the 1850’s, so it is possible one of them might have worn such a dress.

And for the bonnet, which fit under the Brown Challenge:

What the item is: Corded Bonnet

The Challenge: Brown

Fabric: 100% cotton fabric, 1 yard

Pattern: The Godey’s 1850’s corded bonnet pattern, plus tips from the Sewing Academy and my own alterations from pictures of originals of the 1860’s.

Year: 1860’s

Notions: Thread, twill tape, starch.

How historically accurate is it? 85% I don’t know. It’s the right shape, but the fabric is a little iffy. But it was $3 a yard at Walmart so. . .

Hours to complete: Five. There is lots of cording. Then it took 7 hours to dry after starching.

First worn: For an Oregon Trail day at Rock Creek Station, at which I taught fourth graders about spinning and weaving.

Total cost: $6, if I bought it all for project. Some was stash.

Running Towards the Camera

Running Towards the Camera

Thanks for reading, and as always, let me know if you have any questions!

 

Advertisements

An 1840’s Summer Dress

This year, as I have told you before, I am participating in the Historical Sew Monthly.  The challenge for March was “Stashbusting”, meaning you had to use ONLY items from your stash.  I took that to mean items which I have had for a year or more.  Right away, I knew what I wanted to make!

Last year, I was at Hancock Fabrics getting some muslin or something, and as is my habit I was browsing the economy fabric section when a bolt of fabric caught my eye.  100% cotton in a charming print that just looked like it stepped out of the 1840’s, only $3 a yard regular price!  To make things even better, I had a coupon for 50% off any piece of fabric at regular price!  So I went home with 8 yards and only a vague idea of an 1840’s dress.

I commenced to research, and after a long stint of gazing at original dresses on Pinterest and comparing them to original patterns, I bought the Laughing Moon 114 Mercantile Fan Front Dress pattern.  I had everything together and I had a plan!  Except then we moved, and life got really busy, and the fabric just sat on my shelf, and waited.

Fabric and a Pattern

Fabric and a Pattern

So when I heard the challenge for March was “Stashbusting”, I knew I had to pull that fabric out and start that dress

But first I had to find that ONE dress that inspired me, that I wanted to take cues from and design features from to make the perfect dress,

Original 1840's Dress

Original 1840’s Dress

This dress, in a private collection and pictured on an auction site, fit the bill nicely.  I loved the opening at the front neck, and the little ruffles on the mancherons.  I was less a fan of the poofy lower sleeves though.  I absolutely LOVED the flat pleating for the fan front.  It just seemed more my speed than the frilly smocking at the front of many fan front dresses.

So then I had a plan.  Now I just had to put it into effect.

First, as all good seamstresses should, I made a mockup.  I traced and cut the pattern to the size suggested on the pattern envelope, only to find it was far too large in the waist.  This is why you always make a mock-up!  I was able to take in the darts on the final lining then, and properly fit the bodice to the lining.  I also boned the darts with spiral steel boning, because I feel it is closest to whalebone, having carefully felt the flex of the real thing on an antique once before.  (Cutting out the dress was only interesting in that I had to cut the right and left bias sleeves the opposite directions.)

Fan Front in the Making

Fan Front in the Making

Pleating the fan front was far easier than I thought it would be, and it went together nicely.  You can see the beginning of the partial front opening here too.

Next step was to put the whole bodice together.  This involved far more piping then I ever thought it would.  I had to make more.  First time I’ve ever had to make more piping.  My last two dresses with piping I had feet and feet left over.  (This time I piped the shoulder seams, the armscyes, the ends of the mancherons (short sleeves) above the ruffle, the long seam on the sleeves, the neckline, and the bottom edge.)

Piping Bodice Edge

Piping Bodice Edge

To finish the seams, since the bodice fabric was applied to the lining and then sewn together, I sewed bias strips over the seams.  Not the fastest way to finish seams but definitely very neat!

Finishing Seams

Finishing Seams

Finally, I had the bodice together, less sleeves.  Time for a fitting!

Fitting Selfie

Fitting Selfie

Yep.  Seems close!  (Actually, this picture is prior to the piping, it seems.  I tested the fit before and after, and after sleeves.)

So then, sleeves.  First step was to make the mancherons.

Mancherons!

Mancherons!

Let me take just a moment to talk about mancherons.  If you look up mancheron, you will see that it is either a sleeve used as a charge in French heraldry, or that it is an ornamental trimming on the upper part of a sleeve.  The latter definition more aptly applies here.  In the late 1830’s it was the style to either “band down” the great big poofiness at the tops of the puffed sleeves or to have a narrow upper sleeve connected to a poofy lower sleeve.  By the 1840’s this upper sleeve seems to have detached itself and become its own entity, known as the Mancheron.  Mancherons were a thing through much of the 1840’s, with many variations, though they were mostly (but not always) tight around the sleeve.  They were a place where one could add more lace or trim, and sometimes confined a more poofy lower sleeve.

I decided to add a little ruffle and more piping to mine, like in the original dress that inspired me, but I decided against the zig-zag lower edge.  I lined my mancherons with white muslin to enclose the piping and ruffle edge, and everything looked nice!

Now the actual sleeves.  I basted down the piping, and sewed my seams with the recommended seam allowance, and WOW!  They were way too big and just not flattering!  So I pinned them on my arm to get an idea for the tightness and took them way in, and WOW!  They were just too tight!  (I was doing this to just one sleeve.  Get one side right then copy onto the other side.)  So I let out the seam a measly 1/8″ and they were just right.  (And Goldilocks smiled at the sleeves and decided to keep them for herself.)  Every adjustment on these sleeves meant ripping off the piping again too.  Of course all this adjusting meant that my sleeves were just that much smaller than the mancherons, so I basted them together, easing the mancherons to the sleeve.  Good thing they were cut on the bias!

With my sleeves assembled, I sewed them into the strangely shaped armscyes of my bodice, using a zipper foot because of the piping.  It all went together smoothly, relatively.  Time for a fitting!  Well, I had to let out the back closure just a bit because sleeves change a lot of things, but it was all good!  So now, the skirt.

First I sewed my skirt seams.

Find the Seam

Find the Seam

I used mad pattern matching skills.  I had to take a very narrow seam on the edges of the fabric, as otherwise I would have lost quite a bit of the width of my fabric.  My skirt was three panels 60 inches wide, and either I would have had a lot of seam finishing, or I could make a careful narrow seam.  As the fabric had a very firm but not bulky woven selvedge, I went with a narrow seam.  It was barely 1/4″.  (In my defense, many original dresses have very narrow skirt seams as well.)

I had been fussing a bit over how to do the pleats on the skirt. The top edge of the skirt was straight, and the pattern recommended pleating it and sewing it to the waistline of the dress.  But I wanted the pleats to fan out from the point of the bodice like in so many extant dresses.  Then, I saw a wonderful video from Historical Sewing (http://historicalsewing.com/)  in which Jennifer was explaining how she intended to get her cartridge-pleated skirt to follow the bottom edge of her 1840’s bodice. (I’m not copying her, I swear!)  (You can find her video here: https://www.facebook.com/video.php?v=879267112131364&theater )  So, I followed Jennifer’s lead and pressed down the top edge of my skirt for the cartridge pleats, pressing the top fold deeper at the front where the front point was.  I measured how deep the point was below the waist line and made my fold that much deeper in the center, but the width was an exercise in “That looks about right”.  I did have the points for the side seams marked into the skirt, so I was just right, actually.

Stitching the Cartridge Pleats

Stitching the Cartridge Pleats

I ended up doing three rows of stitching for my cartridge pleats.  It took me about four evening to get them all done.

Then came the fun part– gathering up the pleats and attaching the skirt to the bodice!

Stitching Pleats Down

Stitching Pleats Down

Before I stitched the pleats down, I gathered them up, laid the skirt flat with the hem level, and held up the bodice to make sure the top edge was right– it was perfect!  So I started sewing the pleats down, one at a time.  As you can see, I made my pleats quite small and close together.  I counted and I had about 25 per inch in the back half and 20 per inch in the front half.  I had the same amount of fullness in the skirt all around, but there was more distance for the same number of pleat in the front due to the slope of the bodice point.

After stitching them down on the inside, I blind stitched every other pleat to the piping on the outside for a perfect effect.

All Stitched Down

All Stitched Down

This section took me about 5 hours, from gathering to skirt all the way on.

Now, I am a chicken, and I never hem skirts until I have them attached to my waistband because I am afraid I will make them the right length, so I measured and pressed the hem, using a different dress I knew was the right length and is worn over the same petticoats as a guide.  I laid them on the floor one on top of the other.  Simple but effective.  I opted to make this dress half an inch longer than the other dress.  At this point, it was Tuesday morning, and it was the final day of the Stashbusting challenge, so I had to hurry!  I sewed up the deep hem, sewed on hooks and made thread eyes, and finished the cuffs of the sleeves.  (They ended in little slits with hooks at the bottom so I can open them if needed and get my hand through when putting on the dress.)  As soon as my husband got home from work, I pressed the whole dress, got dressed, grabbed my handmade 1830’s-1840’s shoes and an old book for a prop, and we walked to the park to take photos!

(Let me just say here that my dear husband, Philip Patton is a wonderful photographer, and all of the photos that follow are his work and copyrighted by him.)

Perfect Hour of Sunset

Perfect Hour of Sunset

This was the first photo we took.  Up to this point, I had not seen myself in the dress, as I had put on the undergarments upstairs and the dress downstairs, where there was no mirror.  I was very pleased to see a nearly perfect 1840’s bell-shape silhouette!

Back

Back

Side

Side

I am wearing under this dress my 1830’s bloomers, my old 1840’s chemise from my first year of college (The 1830’s chemise has poofy sleeves which  won’t fit under the tight sleeves of this dress.), my old Silverado Bust Gore Corset I made when I was 16 going on 17 (still fits, but then again that is after I stopped growing), my tucked petticoat with lace, my corded petticoat, and my flounced crinoline and organdy petticoat.  No corset cover.  The bodice doesn’t really require one.

Ankles!

Ankles!

Also, my mustard stockings.  You can also see my handmade shoes in action here.

So Romantic

So Romantic

Looking at the Book

Looking at the Book

Hi!

Sigh…

I Feel Lovely

I Feel Lovely

It was the hardest thing to keep those little sections of hair over my ears.  I could hardly stand it.

Golden Light

Golden Light

Bodice Front Detail

Bodice Front Detail

Piping!

Piping!

Piping and Pleats!

Piping and Pleats!

Reading the Psalm Book

Reading the Psalm Book

This is a very sweet old Swedish Psalm Book I have, published in 1884.  (Yep, too late for this dress!)  It has in it the standard Scripture and Hymns for every Sunday of the year.  I just so happened to open it right up to the reading for Easter in this photo.

Also, these are my favorite sleeves I’ve yet done, I think.  I love everything about them!

So, as this is for the Historical Sew Monthly, I suppose I should give you the facts!

Challenge #3, Stashbusting!

What the item is: An 1840’s Summer Dress

The Challenge: Stashbusting!

Fabric: Lightweight 100% Cotton Print

Stashed for how long?: About a year.

Pattern: Laughing Moon Fan Front Dress, altered to my own liking.

Year: 1840’s.

Notions: Thread, hooks, spiral steel boning.

How historically accurate is it? I did a LOT of handsewing on this dress. A lot more than I typically do. The print I think is close enough, and I was inspired for the bodice pleats and frills on the sleeves by an original dress. I did use a machine for the long seams, though. 85-90%?

Hours to complete: Considering I spent about 5 hours on just attaching the skirt to the bodice, I don’t even want to know. I would guess 40+.

First worn: For pictures!

Total cost: Drumroll…. At $1.50 a yard for the fabric, the pattern cost more than everything else combined. $35 total. Ish.

Happy Easter!

Happy Easter!

If you have any questions or comments, I’d love to hear them and answer!  Thanks for reading!

 

A Sontag, or a Historical Shawl

For the second challenge of the Historical Sew Monthly, “Blue”, I decided to knit a blue Sontag, or shawl.

Actually, I decided to knit a blue sontag, then realized it fit perfectly into the February challenge!  That’s the way it went.  Really, I had no idea what to make otherwise, other than a fuzzy idea about a blue work shirt for my husband.  I’m still working on the shirt.  (Yep, making a shirt too.  He is going to need one for blacksmithing at Stuhr Museum this summer.)

Sontag

Sontag

There is not really a definition of “Sontag” anywhere to be found, but they are generally known as a long slim shawl that overlaps in front and ties in back.  This prevents the struggle of dealing with the ends of a shawl, and keeps it in place while one is working.  Sontags are somewhat related to bosom friends but a bit more aesthetically pleasing, at least to my eye.

I of course knit mine, and chose a pattern that was no-frills and no-fuss, but still feminine and pretty.  I did not use a historical pattern, but one the same shape.  I knit my sontag from the Marianne Dashwood Shawl from Jane Austen Knits Magazine, with three skeins of Elsebeth Lavold Silky Wool.  (Not the most accurate choice, but it was that or buy new yarn.  I own a yarn shop.  I shouldn’t have to buy new yarn.  At least it has the right hand and look.)

Sontag Back

Sontag Back

So without further ado, here are the challenge details!

Historical Sew Monthly Challenge Blue

What the item is: A Blue Sontag

The Challenge: Blue!

Fabric: Knit from three skeins of Elsebeth Lavold Silky Wool in Woad. (45% wool, 35% silk, 20% nylon)

Pattern: Marianne Dashwood Shawl from Jane Austen Knits

Year: 19th Century in general.

Notions: None.

How historically accurate is it? A Sontag is a historically correct type of shawl for much of the 19th century, but this is not a specific pattern from any historical time frame, rather just a pattern designed in the style of. The yarn is not right by content, but the look is just right. It looks like a homespun yarn and has the right body when knit up, and I didn’t have to order something special in. I’d say maybe 50% accuracy, giving myself points for the right shape. I hope to wear this on chilly days when I’m working at Stuhr Museum this spring and summer, and also with my brown 1830’s dress.

Hours to complete: Yikes. 30? All I know is that I spent an entire event working on it trying to finish it and couldn’t.

First worn: As a modern piece in my yarn shop. It works well with a fitted modern shirt too!

 

 

Please comment below if you have any questions!

Published in: on February 16, 2015 at 7:00 pm  Comments (4)  
Tags: , , , , ,

Late 1880’s- Early 1890’s Corset from the Kingfisher Chisholm Trail Museum

This year, I am participating in The Historical Sew Monthly, formerly The Historical Sew Fortnightly.  I am going to do my best to finish each project on time and also actually blog about said projects.  So far, here is the post about the January Challenge, Foundations, still in January, the month the first challenge is due!  Huzzah!

The first challenge for the Historical Sew Monthly this year is Foundations.  I was at a bit of a loss as to what I wanted to do at first.  I mean, there are a lot of options, it’s hard to narrow one down.  Well, in the last week of December, the wonderful Marna Davis posted in the Historical Sew Fortnightly Facebook group that she had found a corded work corset at the Kingfisher Chisholm Trail Museum (http://www.ctokmuseum.org/) where she volunteers and had drafted a pattern from it.  She believed the corset to come from the time of the famous land rush, and was willing to make the pattern available to us for a corset sew-along.  As I am hoping to work at Stuhr Museum of the Prairie Pioneer this summer in the Railroad Towne, along with my husband, I jumped on it.  I thought a corded work corset would be just the thing!

Original 1890's Corded Corset

Original 1890’s Corded Corset

The original corset is made of a fine tan cotton twill and had measurements of 30″-24″-29″, without the two inch lacing gap, or spring, in the back.  Thus it would fit someone with measurements of about 32″-26″-31″.  This was not a corset designed for tight lacing and making a super fashionable silhouette.  This was a corset designed for comfort and ease of wearing while doing one’s daily work.  Also, amazingly, I only had to slightly enlarge the bust and slightly take in the waist for the pattern to fit me.  Otherwise, I made everything to the same dimensions.  The original corset only has two steel bones, one on either side of the back by the lacing, and a steel busk.  Otherwise, all stiffening in the corset is done with rows of sewn-in cording.  When I made my corset, I used the same number of rows of cording in each section as the original, since I was almost the same size.

The first step was finding the fabric.  I managed to find a fine tan herringbone twill that fit the bill almost perfectly.  It was sturdy and had almost no stretch.  I also ordered in a separating busk and corset lacing.  (I was out of both items.)  I had some cotton yarn that was relegated for the cording, and I ordered in some safety buckles for the shoulder straps.

Then I cut it out and got to work!

Inserting the Busk

Inserting the Busk

The first step is always inserting the busk.  Awesome little antique bone awl given to me by my friend Cyndi.

Then it was on to the first set of cording.  I stitched it in with a zipper foot, one row at a time.

First Set of Cording

First Set of Cording

You can see I had a little bit of shrinkage and some fabric from the inner layer to cut off.  You can also see the waist tape I put in to avoid stretching out the waist.

Side Panel and Its Cording

Side Panel and Its Cording

I sewed the side panels on, each layer individually so the seam would be enclosed and neatly finished.  I then sewed in the eight rows of cording in the side front panel, not forgetting the stay tape.

Front Half

Front Half

Front Half is Done!

Then I started on the back.

Back Panels with Lacing Eyes

Back Panels with Lacing Eyes

First I sewed the boning channels, then inserted the grommets and the bones, and sewed in the four rows of cording on each back piece.  There was not a lot of cording shrinkage with only four rows of cording– at least not nearly as much as with eight rows.

Back Half

Back Half

I then sewed the side backs to the backs the same as with the front half.  Time for cording!

Back Half, with Cording

Back Half, with Cording

It was at this point that I realize I had forgotten the waist tape in the back half.  Phooey.  There was no way I was ripping things out at this point, so I just decided to soldier on!

Halves Together

Halves Together

I then made a flat-felled seam to sew the halves (quarters?) together, felling to the front to allow these tabs to lie flat towards the back.  “But wait!” you ask, “What are those tabs for?”  Well, the original corset has them, and they are a bit of a mystery.  I am going to use them to buckle on a skirt-supporting bum roll or very small bustle.  Even working ladies like to be somewhat fashionable!

Strap Placement Binding and Strap

Strap Placement Binding and Strap

The next step was to bind the edge of the corset where the strap attached and attach the strap.  The next step was positively evil.  I had to bind the corset with twill tape.  Now you might think you could just sew the tape on all in one fell swoop by machine, but you would think wrong.  I couldn’t manage to catch both layers of the twill tape while also catching the corset layer.  It was always just two of three.  Not always the same two of three.  If I ever do this again, I am going to stitch the twill tape onto just one side of the corset edge, and then handtack it down on the other side.

Binding

Binding

But in the end, it all looked pretty good!

Completed Corset Sans Buckles

Completed Corset Sans Buckles

In the meantime, I had received a notification that the company I had ordered the buckles from did not have those buckles anymore.  So I ordered new ones in.  It took a little longer to get them in, but I was finally able to attach them last night and put the last final touch, a narrow lace edging, on.  Yay!

But the proof is in the pudding, and no matter how good a corset looks on a sewing table, you don’t know how good it is until you have tried it on.  So this evening, we had a mini photo shoot to show how it fits and looks on a body!

Finished 1890's Work Corset

Finished 1890’s Work Corset

Front View 1890's Work Corset

Front View 1890’s Work Corset

(Um yeah, that photo is a bit dorky.)

Strap Detail

Strap Detail

Fun fact: I made that chemise in high school.  Really.  And it fits just as badly now as it did then.  The arm holes are cut way too high. I need to make a new one.

So here are my pertinent Historical Sew Monthly details!

1890’s Corded Work Corset:  A Study in Tan and Cream

The Challenge: Challenge Number 1, Foundations

Fabric: 100% cotton twill.

Pattern: Pattern drafted from original corded work corset, supplied by Marna Davis.

Year: Late 1880’s to Early 1890’s.

Notions: Steel Bones, separating busk, cotton yarn, cotton twill tape, cotton corset lacing, #00 grommets, thread, lace.

How historically accurate is it?  I’d say 98%.  I used historical sewing techniques, a pattern taken from an original, and historical fabrics.  The only majorly wrong thing is that the lace is polyester.  I could have sworn it was cotton, and it feels like cotton, but there on the spool it says “100% polyester”.

Hours to complete:  It would have been 8 if I had gotten the binding right on the first try.  As it was, 12-14.

First worn:  For photos.

Total cost:  $30, counting the value of the bones and twill tape I had in stash.

 

Questions?  Comments?  I’d love to answer them!  Just drop me a note below!  Happy sewing!

Published in: on January 29, 2015 at 9:48 pm  Comments (6)  
Tags: , , , , , ,

I Knit a Sweater!

Well, I knit two sweaters this past year.  The first one was a nice little cotton-linen number.  It was my first sweater ever.  (Yes, I’ve been knitting for ten years, and just finally knit a sweater.)

DSCN5081

Then for Christmas, I decided I wanted to knit at least some of my gifts.  This means I knit exactly one.  But, it was another sweater!!!

DSCN5575

This is my darling sister in law, Lauren, with the Fleurette Sweater I knit her.  You can find the pattern for free on Ravelry!  I knit it with a merino-bamboo-silk blend yarn in a deep magenta.

Later I’ll show you my latest nålbinding project, a pair of mittens.  Until then, it’s back to sewing!  It’s always all about the dresses here!

Published in: on January 3, 2013 at 11:39 am  Leave a Comment  
Tags: , , ,
%d bloggers like this: